How to Clean a Kilim Rug
Kilims are pileless style rugs that use flat-weaving techniques for a bold, often colorful design. They make a particularly striking floor covering, but caring for them requires special treatment to avoid damaging the fibers. A kilim rug must be cleaned by hand with a brush and gentle cleaning solution, and vacuumed with care to avoid tearing it. Stains must be treated quickly, though stubborn marks should only be treated for professional cleaners.
Method1: Hand Cleaning Kilim Rugs
- The carpet should be on a flat surface to make the cleaning process easier.
- You can use any broom to clean the rug, but a hand broom, which is essentially a handheld brush with bristles that are long like a traditional broom, offers the most control.
- The vinegar will help keep the colors in the rug from running.
- Don’t scrub the rug too vigorously with the brush. Its fibers are more fragile when they’re wet so you may damage the rug if you’re too rough.
- When you reach the fringe, work the brush over them vertically. It’s not necessary to go over them a second time horizontally, though.
- Re-wet the brush whenever it seems to be getting dry.
- If the rug is particularly dirty, you may want to repeat the cleaning process on both sides two or three times.
- You may want to rinse the rug more than once with a clean, wet brush to ensure that there’s no residue left behind on the fibers.
- You may use a hose to rinse the rug, but don’t let it get fully soaked.
- Flip the rug over every six hours or so to ensure that it dries on both sides.
- Don’t walk on the rug or place any items on it until it’s completely dry.
- If you notice any residue from the cleaning solution once the rug is dry, use a clean, dry brush to brush it away.
- If you leave the rug outside, set it on grass or gravel so it can drain properly.
Method 2: Vacuuming Kilim Rugs
- If your vacuum doesn’t have a low suction setting, use the extension hose or crevice tool attachment to go over the fringe.
- Use a small handheld vacuum if you have one. They are not powerful enough to damage the fibers.
Method3: Treating Spills
- Be sure to lift the rug and blot the floor underneath the spill as well.
- The amount of water that you’ll need depends on the size of the spill. Start with ½ cup (118 ml) and add more if necessary to fully rinse the area.
- If there is a stain left behind even after you rinse and blot the stain, you should consult a professional rug cleaner to handle the job. Trying to remove it yourself may damage the rug.
Method 4: Handling Pet Stains
- For dried pet stains, consult a professional rug cleaner.
- Avoid using urine removal products since the enzymes in the solution may damage the fibers.
Article Source (www.wikihow.com/Clean-a-Kilim-Rug)